Front longerons cut for canard.

Rear bottom reinforcements

Bottom glassed.

NACA vent glassed. Ready to glass bottom tomorrow!

Antenna overview before micro

Antenna in place ready for micro.

Soldered to copper tape

Making the marker beacon antenna

Brake tack glued in place.

Taped inside to ensure easy release later.

Air brake perimeter routed

Working on left side now.

Contour progress.

Bottom contour progress

Rear section finished.

Starting to contour bottom.

NACA surface finished.

Sanding NACA vent

Horizontal plywood, 2xBID, and 2" foam installed.

Plywood pieces floxed in place.

Foam blocks cut ready to micro in place.

Lining everything up perfectly.

NACA vent pattern

Chapter 6 is finished!